Home > Exhibition > Content
Hydraulic piston rod installation precautions
Mar 01, 2019

Hydraulic piston rod installation precautions

1. Let the cylinder be chamfered.

2. If the cylinder is not chamfered, use the mounting sleeve.

3. To deburr and chamfer or round the sharp edge, and cover the threaded end of the screw.

4. It is necessary to remove the residue of processing such as debris and impurities, and clean all parts.

5. When installing, the seal can be oiled or greased, which will make it easier to install.

6. When installing rubber piston rod seals, pay attention to the compatibility between the sealing material and these lubricants.

7. Generally need to use the dust ring. If the oil film on the piston rod is thick, the dust-proof ring with heavy oil scraping will scrape off the oil film ring remaining on the piston rod during the movement of the piston rod, resulting in a similar leakage phenomenon, so it is necessary to prevent such phenomena from appearing.www.xhychromerod.com