Among them, the most troublesome problem for the excavator driver is that the excavator can move, but it can't complete any work. Most of the operators who encounter this problem during the construction process will be helpless. The reason is that the brick house Explain in detail for everyone. When the above-mentioned fault occurs, when the engineer performs on-site inspection, there is no obvious deformation of the cylinder chrome rod of the bucket cylinder of the excavator, and the right rocker connected to the connecting rod is severely deformed and bent. Seeing the nature through the phenomenon, it is not difficult to infer that the pin fastening bolt at the right rocker is detached, and the screw falls behind, causing the right rocker to fall. In the process of tipping, it is placed on the back of the bucket, resulting in Severe bending deformation.
The bucket cylinder cylinder chrome rod will continue to work after the right rocker falls, and will receive a force from the side direction, which will eventually cause the cylinder rod to bend and deform.https://www.xhychromerod.com/