The main broken parts of the guide post are the thread connecting the crosshead and the thread of the fastening piston. These two places are the weak links of the product. If due to negligence in design, sloppy manufacturing and operational reasons, the break Occurs more often.
If there are no problems with the design, processing, and materials, the pre-tightening force during installation must not be too large, otherwise the product will break when the force reaches the yield limit. After long-term operation, due to the excessive wear of the cylinder, the piston in the horizontal row will sink, which will cause additional load at the connecting thread. If it continues to run, it may break the cylinder guide post . This should be paid attention to during maintenance.
In addition, due to damage to other parts, the product may break when it receives a strong impact. In order to enable the compressor to operate normally and continuously, and to extend its service life, a regular maintenance and overhaul system should be implemented. The occurrence of compressor failure will have a great impact on part of the user or production, so the daily maintenance of the compressor is required.
https://www.xhychromerod.com/