Home > Exhibition > Content
Steel chrome plated piston rod plating process level lifting method
Nov 12, 2018

The chrome-plated surface of the finished chrome-plated piston rod tends to adhere to a thicker chrome layer, usually with a thickness of more than 20μm. This layer of chrome plating can improve the hardness, wear resistance, temperature resistance and corrosion resistance of the piston rod. However, the chrome plating process on the surface of the piston rod is not a simple matter. So how do you improve the quality of hard chrome plating when hard chrome plating is applied to the surface of the piston rod?

 

Firstly, when electroplating is performed, the size of the anode rod hanging can be adjusted to control the size of the hydrogen bubble escaped from the cathode of the piston rod to be adjusted. Because this can make the hydrogen bubbles escape evenly, so that the plating thickness of the chrome-plated piston rod is uniform.

 

Secondly, it is recommended to select the horizontal rotating chrome plating process during electroplating. This process can change the chrome-plated piston rod. The electroplating circuit in the hard chrome plating process is similar to the equivalent resistance circuit, so that the power line is approximately evenly distributed and the dispersing ability of the plating solution. Both have improved. In addition, it is necessary to keep the contact points of the clamp clean, firm and closed.http://www.xhychromerod.com/