1. Troubleshooting points
In the fault diagnosis point processing process. The diagnosis of related faults should be based on comprehensive and professional analysis of fault manifestations and causes of faults, and then further processing of all fault parameters should be realized according to the operating principles and processing methods of the system. Secondly, further processing of all fault points should be realized according to the processing performance and processing specifications of the relevant faults. Finally, the specific treatment plan for all faults is designed. At this time, the piston rod of the entire hydraulic press can be guaranteed in the repair process. Whether it is the treatment method or the inspection plan, it is more in line with the operating requirements of the system.
2. Main points of failure analysis
In the analysis points of relevant faults, first of all, a system must be established to predict the relevant results based on the manifestations of the faults. All professional inspectors are required to realize the existing management according to the operating principles, operating methods and operating systems of the system. Scientific setting of parameters and management modes, and then processing of relevant results according to the operating requirements of the system. Secondly, according to the sources and faults of all faulty systems, a special processing mode should be adopted to realize the professional determination of the current working level and working status of the entire system. The last part is the analysis of the specific content of the existing faults and the relevant troubleshooting modes. It is necessary to ensure that in the relevant fault analysis process, professional analysis results can be obtained completely based on the existing management indicators and management methods.
3. Key points of method implementation
In the use points of specific maintenance methods, on the one hand, various parameters and professional facilities should be sorted out according to the application principles of the method and the current fault content research; Design of related programs. It is required that accurate results must be obtained in full accordance with the existing work specifications and work standards, whether in the analysis process of the plan information or the construction process. In addition, the relevant method utilization modes and the preset work elements must also undergo simultaneous analysis and discussion. At this time, the relevant maintenance methods can be made more scientific, both in terms of results and scale of disposal. Reliable and reasonable.
4. The main points of effect evaluation
When the system fails, it is very likely that some key management factors and management points will be omitted in the processing of the results of the maintenance work, so that there is an excessive difference between the specific maintenance effect and maintenance quality of the structure and the set work standards. Therefore, in the special work stage, it is necessary to deal with the relevant deviations, and then the relevant results can be obtained according to the existing management basis and management methods. In the specific analysis stage of the relevant assessment points, the structure of all systems is realized in full accordance with the existing treatment methods and treatment effects, and the future system upgrade planning measures are analyzed according to the established treatment model.
To sum up, the fault handling process of the piston rod needs to realize all the analysis of the fault type, fault cause and fault performance, and then study the relevant fault performance content and fault processing method. In the subsequent processing stage, the points to be followed include the evaluation points of the effect, the management points of the facilities, and the professional operation points of the relevant facilities, so the points must be professionally set.