Home > Exhibition > Content
Analysis of cutting force in hydraulic piston rod machining
Dec 30, 2018

The hydraulic piston rod is a kind of slender rod type, which is difficult to process, and the beating of the hydraulic piston rod will also affect the vibration of the whole unit, resulting in the equipment not being able to operate safely. In short, a fully qualified piston rod with dimensional tolerances and dimensional tolerances is one of the first conditions to ensure proper system operation.

 

So, how can we produce a qualified hydraulic piston rod? In practice, the first step should be to pay attention to the amount of cutting force. In the cutting process, in order to overcome the deformation resistance and frictional resistance of the metal material, the tool must be subjected to a force, that is, the total cutting force. Since the direction and size of the total cutting force will vary with the cutting conditions, the cutting force should be decomposed into several cutting forces in a given direction.

 

In the process of cutting the hydraulic piston rod, there will be some factors that have a certain influence on the cutting force. The first is the material of the workpiece, followed by the amount of cutting, and the tool is also considered. In fact, choosing the right tool angle is the key to machining a hydraulic piston rod.

In short, a fully qualified piston rod with dimensional tolerances and dimensional tolerances is one of the first conditions to ensure proper system operation.

 

So, how can we produce a qualified hydraulic piston rod? In practice, the first step should be to pay attention to the amount of cutting force. In the cutting process, in order to overcome the deformation resistance and frictional resistance of the metal material, the tool must be subjected to a force, that is, the total cutting force. Since the direction and size of the total cutting force will vary with the cutting conditions, the cutting force should be decomposed into several cutting forces in a given direction.

 

In the process of cutting the hydraulic piston rod, there will be some factors that have a certain influence on the cutting force. The first is the material of the workpiece, followed by the amount of cutting, and the tool is also considered. In fact, choosing the right tool angle is the key to machining a hydraulic piston rod.www.xhychromerod.com