Home > News > Content
What Is The Liquid Nitrogen Quick-freeze Guide Post Assembly Technology?What's The Effect?
Dec 05, 2017

In the current production work, the liquid nitrogen quick-freeze guide post assembly technology has been widely used.With the promotion and use of this technology, it also means that the assembly of the mould guide post will be completely out of the "violent" era.

Because in the process of mould assembly , in order to ensure the production effect, it is necessary to make sure that the upper and lower modules can be successfully combined.For achieving this requirement, you must be guided by the guide post to enable the module to match accurately.

From this point of view to achieve precise docking, the guide post needs to be high accuracy.In the actual installation, the guide post and the installation hole are interference fit.Normally the amount between them is around 0.03 to 0.05 mm.

In the industry, the way used in the past is to use a copper hammer and other tools to hammer the guide post, then it can be pressed into the mounting hole.If this assembly is adopted, it will take at least three hours to complete the installation requirements.This method is not only time-consuming, but also very clumsy, and it can easily scratch the surface, and even damage the mould base.

In contrast, if using this kind of liquid nitrogen quick-freeze technology in the process of guide post assembly, not only can save a lot of installation time, and also greatly improve the quality of the mould assembly.

More importantly, in actual production, this kind of assembly method can further reduce production cost and improve economic efficiency.In conclusion,the liquid nitrogen quick-freeze guide post assembly technology provides a great convenience for the efficient installation of the guide post.http://www.xhychromerod.com/